Flat washer, zinc plate, 3/16" ID x 7/16" OD x .045" thick

Flat washer, zinc plate, 1/4" ID x 9/16" OD x .045" thick

Flat washer, zinc plate, 5/16" ID x 5/8" OD x .085" thick

Flat washer, zinc plate, 3/8" ID x 3/4" OD x .085" thick

Flat washer, zinc plate, 7/16" ID x 7/8" OD x .085" thick

Flat washer, zinc plate, 1/2" ID x 63/64" OD x .085" thick

Bolt, 1/4 X 1/2 UNF

Bolt 1/4 X 5/8 UNF

Bolt 1/4 x 3/4 UNF

Bolt 1/4-1"UNF

Bolt, axle adjuster, stainless

Bolt, 5/16 x 5/8 UNF

Bolt, 5/16 x 3/4 UNF

Bolt, 5/16 x 7/8 UNF

Bolt, 5/16 x 1 1/4 UNF

Bolt, 5/16 x 1 1/2 UNF

Bolt, 1/4 x 1 1/4- 28 UNF

Bolt, 1/4 x 1 3/8- 28 UNF

Bolt, 1/4 x 1 1/2- 28 UNF

Bolt, chain guard front, 

Bolt, 3/8x 3 1/2 UNF. 750 head bolt.

Bolt, 7/16 x 3 1/2 UNF, front engine mount, etc.

Bolt, 1/2 x 1 3/4 UNF, footrest mounting 1971 & up

Nut 1/4 UNF plain

Nut, stainless steel  jam nut for axle adjuster 

Nut, 1/2 UNF, rear brake plate to torque arm 71-75 models

Nut, metal locking, 5/16 UNF

Nut, metal locking, 7/16 UNF

Lock nut for clutch and brake lever pivot screws

Nut, 1/4", lock, rocker stud, etc

Nut, 3/8", lock, side stand, etc

Lock nut, swing arm pivot & rear axle

Rocker box stud, 1969 & later 650, 750

Screw, tappet inspection cover clip. 1971 up

Bolt, primary level plug

Kick pedal bolt, 1969 and later

Chrome handlebar mounting bolts. Thread into "P" clamps. Sold in pairs

Cylinder base nut 12 point

Lock nut

Stator stud, short, 650 models 1969 and later

Plug, timing hole, 1/2 x 14 TPI, 1969 &later

Screw, crank case halves, 1969 - up 650's. Slotted UNC

Rocker box bolt, 1/4 x 2 1/4" hi tensile, 650 & 750 models, 4 per engine.

Stud, manifold to head, TR6, TR7

Small hex, 1/4 " nut for TR7 manifold to head 

Oil pump mounting nut, 1969 & later 650, 750

Stud, manifold to carb, stepped, TR6, TR7

Center stand bolt

Bolt, 2BA, headlight mount, 750's

Fork leg stud, all models

Caliper cover mounting screw, stainless

Alternator stud, short, 750 models

Socket head nut 5/16". Cylinder head 750s

Socket head nut 5/16". Cylinder head 750s. Stainless steel. Sold in pairs

Nut for screw # 21-2186 exhaust screw, etc. 2BA

Stop light switch mounting screw. Also replaces 60-3550

Clutch retaining plate screw. 1971 and earlier

Clutch screwed pin

Breather hose clip

Head light mount washer

Washer, flasher clip etc.

Captive nut, tail light mounting 71-72 models

Spire nut for side covers

Hammer drive screws for patent plate. 3 req'd

Hammer drive screws for patent plate. STAINLESS STEEL. Pkg of 3

Tappet adjuster nut 26 TPI, 650 & 750 up to and including 1978, not E models, up to engine #02689.

Washer, shake proof, 1/4"

Washer, oil pump, mounting

Head bolt, center, 5/16 CEI, all 650 models with 9 stud heads

Contact breaker cover screw

Pillar bolt contact breaker, 1968 on

Cupped washer, carb mount

Stepped stud for carb manifold

Cylinder base stud, stepped, outer, 750 models

Gas tap spigot nut 1/4 "

Side cover name plate screw, rotor cover

Nut 2BA.

Bolt, oil drain plug, 3/8-26 TPI CEI, 1973 & later

$4.50 ea

Side stand pivot bolt

Tank badge screw

Gas tap steel washer

Tank badge screw

Battery box screwed peg

Spacer, engine mount, bottom, LH

Spacer, engine mount, bottom, RH

Spacer, engine mount, front, LH

Spacer, engine mount, front, RH

Tappet block bolt, 1968 & later

Washer for stop light switch mounting screw

Washer, head light mount ears , 73 up

Aluminum seal washer for fork drain screws 71-up

Fork tube drain screw. 71 and later

Fork tube nut washer, 71 and later

 Tail light lens screw 73 up

Tail light lens screw 71-72 models

Headlamp "W" clip

Float bowl/ mixing chamber screw

Chrome mounting kit for shocks. 4 chrome bolts & washers, 4 zinc lock nuts and washers

Head lamp mounting bolt kit. Chrome plated bolts and washers (4 pieces). Bolts are 7/16" diameter. Replaces Lucas #s 54115196 and 143086. Fits 1971 and later models.

Stainless steel socket headed cap screw set for lever switch housings. 8 screws and washers. Fits 71-72 drum brake models.

Stainless steel socket headed cap screw set for lever switch housings. 8 screws and washers. Fits 73-75 disc brake models.

Stainless steel socket head cap screw set for primary, timing gear, and kick start cover, 1969 & up