Work shop manual. 216 pages covers 1963 to 1983 650 & 750 models.

Three Bond gray semi hardening gasket cement. Use on all gaskets except head, and anywhere there is no gasket, ie: case halves. 100 gm tube.

Remote oil filter. Mounts  between rear fender and frame oil tank. Disposable filter element included. Uses Triumph Trident T150 style filters, part # 70-6571.

Replacement filter for custom filter. Also fits Trident T150.

Oil tank dipstick. 1973 and later models

O ring for oil tank dip stick

Oil pump 650, 750 models

Stud, oil pump 650, 750 models UNF/UNC, 1969-up

Oil pump mounting nut, 1969 & later 650, 750

Washer, oil pump, mounting

Oil pressure release valve. Stainless steel. replaces 70-5896 & 71-2210

Spring oil pressure valve, 750 twins. Also 70-7591

Crank case sump filter, 650 and 750's

Connecting rod bolt 650cc. Sold each

Connecting rod bolt 750cc. Sold each

Connecting rod nut UNF 6 point.

Connecting rod shell bearing set, 650 & 750 models. Standard size

One set does one engine.

Connecting rod shell bearing set, 650 & 750 models. -.010

Connecting rod shell bearing set, 650 & 750 models. -.020

Connecting rod shell bearing set, 650 & 750 models. -.030

Connecting rod shell bearing set, 650 & 750 models. -.040

Tappet block, intake. 650 & 750 models.

Tappet block, exhaust. 650 & 750 models.

Tappet block bolt, 1968 & later

Washer, shake proof, 1/4"

Dowel, hollow, crank case half, 650 models

Screw, crank case halves, 1969 - up 650's. Slotted UNC

Dowel, hollow, crank case half, 750 models

Dowel, hollow, tappet oil feed. 650 & 750 models.

Cam follower, intake. 650 & 750 models.

Cam follower, intake. Not "R" type

Cam follower, "R" type, exhaust. 650 & 750 models.

Valve and bronze guide set for unit 650 models. 4 valves & 4 guides.

Valve and bronze guide set for 73-78 750 models. 4 valves & 4 guides.

Valve and bronze guide set for 79-up 750 models. 4 valves & 4 guides.  Order guide circlips 70-3209 separately. Below

Exhaust valve, British made OEM quality

650 & 750

Intake valve, British made OEM quality

650 & 750

Valve lapping stick. 1 1/8" &1 3/8" dia. cups

Intake valve guide, bronze, STD. size, 650 models

Exhaust valve guide, bronze, STD. size, 650 models

Intake valve guide, OEM style, bronze. STD size.  750cc. up to 1979 but not D models

Exhaust valve guide, OEM style, bronze. STD size.  750cc. up to 1979 but not D models

Intake valve guide, OEM style, bronze. STD size. 1979 D models and later. 70-3209 circlips required

Exhaust valve guide, OEM style, bronze. STD size. 1979 D models and later. 70-3209 circlips required

 Circlip for 1979 D and later valve guides. Sold each

Valve spring set 650 &750s

Valve spring collar, top, 650's & 750's

Valve spring cup, bottom, 650's

Pushrod tube, 1969 and later 650's

Pushrod tube, billet alloy, 1969 and later 650's. Sold EACH

Pushrod tube,  750's, 73-79

Pushrod tube, billet alloy, 750's. Sold EACH

Pushrod sealing ring

Pushrod O ring

Pushrod seal sleeve, 650 & 750 models, 2 per engine

Pushrod 750s UK made, sold EACH  

Pushrod 650s Hi performance , set of 4

Pushrod 650s UK made, sold EACH

Tappet adjuster screw 26 TPI, 650 & 750 up to and including 1978, not E models, up to engine #02689.

Tappet adjuster nut 26 TPI, 650 & 750 up to and including 1978, not E models, up to engine #02689.

Mushroom head tappet adjuster kit. CEI. 650 & 750 models to 1978 except as described below for RS012. Hex key adjusters.

Mushroom head tappet adjuster kit. UNF. 1978 750 "E" models only after engine #02689, and all 1979 and later models. Hex key adjusters.

Rocker arm ball pin, 650,750 models

Thrust washer, 3/8", rocker shaft

Bushing, wrist pin/connecting rod 650 cc

Valve keepers 650 & 750

Rocker feed oil pipe 750 twins

Rocker feed oil pipe 650 twins

Rocker feed dome nut 650 twins, chrome

Rocker feed dome nut 650 twins, stainless

Rocker feed dome nut 750 twins

Alternator cover dome nut 650/750 twins

Tappet inspection cover 6 hole

Tappet inspection cover. Sold each.

Clip for tappet inspection cover

Screw, tappet inspection cover clip. 1971 up

Billet hex head tappet covers. Set of 4

Chromed, finned tappet inspection cover. Sold as set of 4.   see product notes

Tappet inspection plug 1972 models

Washer, folded copper

Rocker box stud, 1969 & later 650, 750

Nut, 1/4", clevelock, rocker box, etc.

Cam bushing set of 4. 

Contact breaker cover

Contact breaker cover screw

Pillar bolt contact breaker, 1968 on

Pillar bolt washer

Patent plate

Hammer drive screws for patent plate. BRASS. Package of 3

Hammer drive screws for patent plate. STAINLESS STEEL. Pkg of 3

Flywheel sludge trap tube.

Plug for flywheel sludge trap tube.

Woodruff key, crank pinion, all years

Woodruff key, rotor

Welch plug, crankcase, rear

Plug, timing hole, 1/2 x 14 TPI, 1969 &later

Case stud, lower engine, 650&750 models

Rocker box bolt, 1/4 x 2 1/4" hi tensile, 650 & 750 models, 4 per engine.

Rocker box bolt, 3/8" dia. short. 750 cc models

Socket head nut 3/8". Cylinder head 750s

Socket head nut 5/16". Cylinder head 750s

Socket head nut 5/16". Cylinder head 750s. Stainless steel. Sold in pairs

Double flat washer for 21-2205 socket nut above.

Head bolt, center, 5/16 CEI, all 650 models with 9 stud heads

Cylinder head bolt, outer, 650 models only.

Cylinder head bolt washer, 650&750 models 1969 and later

Cylinder base dowel

Cylinder base stud 3/8", 650 & 750

Cylinder base stud, stepped, outer, 750 models

Case stud, inner kicker cover, all models

Torque stay stud. 750 models

Cylinder head stud 3/8"

Cylinder head stud 5/16"

Stainless steel socket head cap screw set for primary, timing gear, and kick start cover, 1969 & up

Cylinder base nut 12 point

Cylinder base nut

Crank shaft nut, right side, 63-71 650cc

Rotor nut 650 models only

Rotor nut 750 models only

Tab washer, rotor nut

Welch plug, tach drive

Spacer, thrust, tach drive

Crank bearing drive side (LH)

Crank bearing drive side (LH) with C3 clearance

Crank bearing timing side (RH) 1971 models. Before engine #GE.27029

Crank bearing timing side (RH) 1971 models. Before engine #GE.27029. C# clearance.

Crank bearing timing side (RH) also replaces #70-3835 1972 and later models. Engine #GE.27029 & later.