Work shop manual. 216 pages covers 1963 to 1983 650 & 750 models.

TR7/T140 Gas tank.3.6 US gallon , raw steel, Made in England. Limited quantities. Also 83-4772

Gas tank styling strip holder

Gas tank styling strip, front, chrome, 650 models with US tank

Gas tank styling strip, rear, chrome, 650 models with US tank

Bracket, gas tank brace, USA style tanks only.

Bolt, gas tank center mount, 750's

Cupped washer for central tank mount, some parts books read 83-3814.

Spacer tube, central gas tank mount, 1971 and later 650cc models

Spacer tube, central gas tank mount, 1973 and later 750cc models

Grab rail, chrome, 650 models with round reflector gusset.

Grab rail,  chrome, 650 models with  reflector tab mounts.

Grab rail, chrome, 73-78 750 models

Luggage rack, 1979

Luggage rack, 1973 to 1978 TR7 & T140

Torque stay top motor mount, 12 inches, 750 models

Sump bash plate , Oil in Frame models

Front fender, 1971-72 models, stainless steel

Front fender, stainless steel, 1977- later. This fender has 5 holes. It has rolled front lip and edges, and knife edge bottom. 

Front fender stay, front, 1973-76, ALSO 97-4547

Front fender stay, top, 1973-76, also 97-4550

Front fender stay, bottom, 1973 and later. Also # 97-4535

Riders peg rubbers w/logo

Riders peg rubbers 1979 - up

Riders peg rubbers , short folding style for 71-72 TR6C

Passenger peg rubbers 

Kick pedal rubber, open end

Gear change lever rubber

Center stand rubber

Rear chain - axle adjuster 1980 and later

Rear chain - axle adjuster 1971 - 1979

Swingarm / axle adjuster plate 

Bolt, axle adjuster, stainless

Nut, stainless steel  jam nut for axle adjuster 

Side stand 650 & 750 models

Side stand pivot bolt

Nut, 3/8", lock, side stand

Side stand spring

Center stand, 71 up  models

Center stand spring 1971-82 models

Center stand bolt

Chain guard fits 1971 and later. Primer finish.

Bolt, chain guard front, 

Tapered neck bearing  and race

Dust shield, neck bearing, 

Washer, neck bearing

Front fender mounting bracket for 1971-72 models. Bike takes 4 brackets

Front fender mounting bracket bushing grommets for 1971-72 models.

Fork stem nut 1972 and later 3/4 x 24TPI

Fork stem nut with hole for steering damper 3/4 x24, 1971 later

Fork stem nut 1979 + later

Plastic cap for fork stem nut 1979 + later

Grease nipple, swing arm and drum brake cam

Fiber washer, grease nipple

Bushing, swing arm , 4 req'd

Swing arm dust shield (4 req'd)

Swing arm pivot bolt

Lock nut, swing arm pivot & rear axle

Headlamp brackets, pair 73 -up

Headlamp bracket RH

Grommet for throttle cables thru head lamp mount

Headlamp bracket LH w/ switch hole

Head light mount rubber, 73 up

Head light mount rubber grommet, 73 up

Bolt, 2BA, headlight mount, 750's

Washer, head light mount ears , 73 up

Head light wire mounts 71-72 models

Head light mount sleeve nut 71&72. Stainless steel

Head light mount washer

Head light mount rubber grommet 71-72 models

Head light mount bracket bush-top.71-72 models

Custom head light mounts. Tomasselli style, rubber mounted, chrome clamps, aluminum ears

Custom head light mounts. Chromed steel

Custom head light mounts. Polished aluminum

Steering lock with keys

Steering lock retaining bolt

 Tank mounting rubber 650,750's

Steady rubber for gas tank, convex type  for 650s. 2 req'd

Steady rubber for gas tank, concave type  for 750s. 2 req'd

Tank mount center buffer, rubber- 73 & up

Tank mount center buffer, rubber- 71 & 72

Grommet for gas tank top, 1973 and up 750

Grommet for gas tank top, 71 and later 650

Retro style side cover kit. Allows use of round air cleaners. Plastic composite. Fits 71 and later.

Pre 71 air cleaner off set type for 900 Amal. For use with non stock side covers. Threaded adapter included.

Air cleaner cover 73-77 models. Tiger TR7 LH

Air cleaner cover 73-77 models. Tiger TR7 RH

Air cleaner cover 73-77 models. Bonneville T140 LH

Air cleaner cover 73-77 models Bonneville T140 RH

Side cover set for 1978 T140 Bonnie (not E)

Side cover set for 1978 Tiger & 78 T140E

Side cover set for 1979 and later T140 w MK II carbs. 

Side cover set for 1977 Jubilee

Side cover retaining spring

Side cover name plate

Side cover name plate screw, rotor cover

Side cover decal, adhesive back

Side cover decal, adhesive back

$10.50 ea

Side cover name plate 79- up T140E

Side cover name plate

Side cover name plate Bonneville Special

Side cover name plate, Tiger black/silver

Side cover name plate, Tiger gray/silver

Side cover name plate, Jubilee Edition

Decal, "5 SPEED" round

Spire nut for side covers

Spire nut for side panels, 1978 & up

Side cover blanking plug, brake drum plug 71-72 models,  replaces #60-2594, 60-3669

Side cover mounting grommet

Speedo 150 mph fits 1968 to 1978. Stock bulb holders will not fit. New bulb and holders included. 

click image for large pic   see product notes

Tachometer, 8000 RPM fits 1968 to 1978.  Stock bulb holders will not fit. New bulb and holders included. 

click image for large pic   see product notes

Replacement bulb holder for above speedo and tach. Will NOT fit stock instruments.

 Switch console, 1979 models

Speedo and tach mount

Speedo and tach mounting cups, 71 up

Speedo and tach mounting cup, 1979 up

Tachometer gearbox, 1971 and later models. Also replaces 70-9331

Speedometer drive 71 and up 650/750 twins

Speedometer drive LH for Veglia models

Battery tray rubber pad

Battery box screwed peg

Battery tray mounting grommet, 3 req'd, 1971 later

Coil mounting grommet 650/750

Battery tie down strap, 12"

Buckle, battery strap , 71-75 models

Oil tank dipstick. 1973 and later models

Oil filter

Sump gasket for frame oil filter, 2 req'd

Sump plate

Bolt, oil drain plug, 3/8-26 TPI CEI, 1973 & later

$4.50 ea

Breather pipe, engine to "T" piece. Round shape. 1970 to 1973 650 & 750 models

Breather pipe, engine to "T" piece. "D" shape. 1974 to 1979  750 models

Breather pipe, from frame neck to "T" piece, all 1971 & up 650 & 750

Breather pipe, "D" shaped, rear fender, 39", 650 models

Breather pipe, "D" shaped, rear fender, 44", 750 models

"T" piece, breather hose, 1971 to 1973 650, 750 twins

"T" piece, breather hose, 1974 & later 750 twins

Breather hose clip

Clip for D shaped hose

Screw for clip # 83-1615

Nut for #97-3894 screw, above.

Captive nut, top motor mount to frame

Spacer, engine mount, bottom, LH

Spacer, engine mount, bottom, RH

Spacer, engine mount, front, LH

Spacer, engine mount, front, RH