The chrome plating on the fenders  from England is second rate. If you plan on purchasing one of these fenders, be prepared to have it re-plated if you are looking for show quality. These fenders 

In short: no warranty on the finish.

These mufflers have a classic "British"  sound to them and are fairly loud. They produce a pleasantly loud "bark" when under acceleration.

Back to Triumph Exhaust Page

These mufflers fit 1 1/2 inch OD head pipes which are stock on 1971 and 1972 models. 

1973 and later bikes with stock 1 3/8 inch headers require reducer sleeves part # 81-8005

These mufflers have a welded channel bracket and can be mounted using flat straps part # 07-0006.  They may also be mounted to the stock muffler hangers if the stock holes are drilled to 11/32".

These mufflers have a  low rumble and are  LOUD

Back to Triumph Exhaust Page

These instruments are approximately 1/4 " taller than stock. They will fit the stock rubber cups but there will be a slight bulge in the bottom of the cup.

These instruments are approximately 1/4 " taller than stock. They will fit the stock rubber cups but there will be a slight bulge in the bottom of the cup.

The chroming on this item is liberal and it it advisable to clean the threads of chrome  prior to installation